Tyre Bead Sealer with a difference... it works

TYRE BEAD SEALER SUITABLE FOR ANY TYPE OF WHEEL FROM CAR ALLOYS TO MULTI PIECE OFF ROAD WHEELS 

Drivesafe Tyre Bead Sealer is designed for use between the wheel and rim and tyre bead , to apply the product you need a means of breaking the tyre bead down and applying the product between the tyre bead and wheel rim , any garage or tyre shop can do this and use this product instead of what they typically use which often goes down again.

We all know the problems associated with Alloy wheels and issues regarding corrosion around the tyre bead area which often leaks resulting in tyre deflation over a period of time.

There are many products on the market that claim to work, but most of them require the tyre to be removed and the alloy wheel and then the wheel cleaned up by a wire brush or something similar. This method of sealing does not guarantee an airtight seal afterwards and sometimes only way to cure the problem is to a costly wheel refurbishment.

Many products used within the industry are a glue type sealer, the use of this type of sealer the tyre needs to be removed from the wheel and the wheel thoroughly cleaned down with a wire brush type device.  Cleaning the wheel down in this way will remove the protective lacquer finish and this is why glue based products are ineffective. 

WHAT IS DRIVESAFE TYRE BEAD SEALER

Tyre bead sealer is a product which is applied between the tyre bead and wheel rim. This product is extremely effective as when the tyre bead pops into place on the wheel rim it creates a seal which lasts until the tyre is removed again. Once the tyre has been inflated to pressure then excess can be washed off with just water and does not effect the seal between the rim and tyre bead.

Tyre Bead Sealer is very effective on alloy wheels which suffer from corrosion around the rim area resulting in a poor seal, along with multiple piece wheels on off road equipment with O rings. This product is suitable for virtually any wheel as it has been used extensively by ourselves within the tyre industry on a vast range of applications from sealing Alloy wheels to commercial wheels to large loader wheels. 

Product is available in either 250ml bottle which is suitable for up to 1 x 20" Alloy wheel or 500ml for anything larger or up to 2 x 20" Alloy wheels


TO PURCHASE OUR PRODUCTS PLEASE VIEW OUR SHOP ON LINK BELOW OR ANY QUESTIONS PLEASE CONTACT US VIA LINK

www.tyre-sealant.com/tube-tyre-sealant-bead-and-rim-sealer/


payments via credit or debit cards 01527 510865

Further information regarding our products please view

www.tyre-sealant.com

Drivesafe Tyre Bead Sealer

Tel... 01527 510865 

For further information email...:info@tyre-sealant.com